Chain-Vey risolve i problemi del birrificio

Categorie
BY Cyberoptik | 18 Maggio 2018 | Caso di studio , Chain-Vey
 

A craft brewer owned flexible screw augers for some time, using them to transport grain and grist. Maintaining the screw auger though became a headache, with the screw wearing through the PVC tubing and causing leakage. The brewers were using duct tape to patch up the leaks; but even with that grain and grist accumulated on the floor. That is when Chain-Vey tubular drag conveyors stepped in.

Le coclee a coclea flessibili sono un sistema di trasporto economico per i produttori di birra. Molti birrai ottengono un Chain-Vey dopo aver provato per la prima volta i trasportatori a coclea. Le coclee a vite possono funzionare bene quando i clienti hanno appena avviato i loro birrifici. Ma con la crescita dell’attività, le coclee a vite non possono crescere con il cliente. Il nostro cliente voleva sostituire il suo trasportatore a coclea flessibile con un Chain-Vey per diversi motivi.

  1. A differenza delle coclee a vite che offrono tubi curvi in PVC o tubi in acciaio inossidabile unidirezionali, Chain-Vey è il meglio di entrambi i mondi con curve ampie e salvaspazio di tubi in acciaio inossidabile di grande effetto.
  2. I dischi non si consumeranno attraverso i tubi, il che significa che non raggiungerai il nastro adesivo e spazzerai il pavimento ogni ora.
  3. I Chain-Vey sono trasportatori delicati e precisi. Non si verificano perdite di prodotto, degrado o disordine durante il trasporto attraverso il trasportatore.
  4. I Chain-Vey possono adattarsi dove si trovano già i trasportatori a coclea esistenti, ma possono arrampicarsi su verticali elevate e percorrere lunghe distanze.
  5. I Chain-Vey sono modulari per progettazione, il che significa che è facile aggiungere ingressi e scarichi per la futura espansione del birrificio.

L’ingegnere di vendita Chris Smyth ha fatto un tour della struttura, ha parlato con i birrai di ciò che volevano e ha effettuato alcune misurazioni. Nel giro di un giorno è stato in grado di fornire un preventivo preventivo. Dopo alcuni feedback aggiuntivi da parte del cliente, è stato consegnato al cliente un disegno di approvazione. Nel giro di poche settimane arrivò la Chain-Vey.

Top view of the conveyor layout

Design details

  • 320 piedi di lunghezza totale del circuito
  • Tubo in acciaio inossidabile Schedule 10 da 4″
  • Orzo maltato in movimento con una densità apparente di 31 lb/ft3
  • Catena in acciaio al carbonio e dischi UHMW divisi
  • 4 ingressi e 5 punti di scarico

Result

Smyth made sure that his customer’s system exceeded expectations. The sweeping elbows of 304 stainless steel and beautiful sightglass allow onlookers to see the grain being conveyed looks great next to your other brewing equipment. After 6 months of owning their new Chain-Vey, his customer couldn’t be happier. The head brewer described in his own words:

“Chain-Vey è stato tutto ciò che volevamo da un trasportatore. Affidabile, facile da pulire e a bassa manutenzione. Non degrada nemmeno un po’ il malto”, ha detto il mastro birraio.

About a year later the brewery wanted to expand capacity even further. With little more than a phone call the Smyth, the head brewer was able to get a quote on additional discharges with some added chain and pipe; all of which arrived within weeks. The simple modular design of Chain-Vey allows all brewers the benefit of future-proofing their systems. This is another reason Chain-Vey is the leading conveyor for breweries used in hundreds of facilities around the world. Also check out our case study on Chain-Veys at Ballast Point Brewing.