Agencements et conceptions de convoyeurs tubulaires
Les convoyeurs tubulaires de Chain-Vey sont entièrement configurables en fonction de votre configuration existante. Les configurations peuvent inclure plusieurs entrées et décharges, une conception optimisée de la rondelle et de nombreuses autres options pour s’assurer qu’il s’agit du bon convoyeur pour vous.
- Possibilité de transporter à la fois horizontalement et verticalement dans un seul convoyeur
- Plusieurs entrées et décharges pour un fonctionnement flexible du système
- Longueurs de convoyeur horizontales et verticales étendues possibles
- Les chaînes à haute résistance permettent au convoyeur de démarrer et de s’arrêter sous les charges
- La conception bidirectionnelle double les capacités grâce à des configurations système plus efficaces
- La conception de la chaîne à maillons permet des changements de direction sur plusieurs plans
- Les conceptions standard peuvent inclure jusqu’à six coudes pour plusieurs changements de direction
- La construction standard du convoyeur tubulaire offre un environnement étanche à la poussière et à l’air
« Il s’agit plutôt d’un équipement à régler et à partir. »
―Adam Sislo, Caribou Coffee
Options de conception sur Chain-Vey
- Chaîne en carbone ou en acier inoxydable
- Entrées standard ou à faible casse
- Transfert de rail en U, tendeurs pneumatiques ou externes
- Décharge rotative, boîte à brosse motorisée, lames d’air
- Disques standard, moulés ou très épais
- Bride, tuyau standard ou voyant
- Et bien d’autres options
Cliquez sur l’image pour l’afficher
“Z” SYSTEM
1. 180° TENSIONING TURNAROUND UNIT
Keeps the chain tensioned within the system and adjusts as the conveyor is loaded and unloaded with product. Configurable with either internal or external tension adjustment.
2. PRODUCT INLET WITH OPTIONAL FLOW BAFFLE
The entry point of product into the conveying system. Can incorporate flow control baffles to set product fill level and prevent shearing.
3. DOUBLE-PIPE FLOOR SUPPORT
Used to support the piping and maintain the set center-to-center distance. The stand includes threaded leveling mounts that allow for vertical pipe adjustment.
4. PRODUCT SIGHT GLASS
Enables viewing during conveying and is made from a clear polycarbonate with the same dimensions as the stainless steel piping.
5. SWEEP ELBOW
Used for gentle changes in pipe direction, sweep elbows are specially bent from seamless pipe to precise dimensional tolerances and uniform concentricity. Based on requirements, elbows are available in a variety of angles and radii for complete flexibility of your system layout.
6. DOUBLE-PIPE CEILING SUPPORT
Designed for suspension from the ceiling using threaded rod or cable and keep piping at the set center-to-center distance.
7. COMPRESSION COUPLING
Standard pipe connections use 4-bolt compression couplings with an internal EPDM gasket and metal grounding strip.
8. 180° DRIVE UNIT
Used in conjunction with the 180° turnaround unit, the drive unit pulls the chain through the drive unit by an electric gearmotor powered sprocket. The drive unit may be run in either direction for single or bi-directional system configurations. The drive unit is installed at the end of the circuit system and is typically used as the final or only discharge point.
9. DISCHARGE TRANSITION
Custom-designed to your application, discharge transitions are supplied to funnel product from discharge points to the desired flange connection or discharge spout.
“C” SYSTEM
1. 180° TENSIONING TURNAROUND UNIT
Keeps the chain tensioned within the system and adjusts as the conveyor is loaded and unloaded with product. Configurable with either internal or external tension adjustment.
2. PRODUCT INLET WITH OPTIONAL FLOW BAFFLE
The entry point of product into the conveying system. Can incorporate flow control baffles to set product fill level and prevent shearing.
3. DOUBLE-PIPE FLOOR SUPPORT
Used to support the piping and maintain the set center-to-center distance. The stand includes threaded leveling mounts that allow for vertical pipe adjustment.
4. PRODUCT SIGHT GLASS
Enables viewing during conveying and is made from a clear polycarbonate with the same dimensions as the stainless steel piping
5. SWEEP ELBOW
Used for gentle changes in pipe direction, sweep elbows are specially bent from seamless pipe to precise dimensional tolerances and uniform concentricity. Based on requirements, elbows are available in a variety of angles and radii for complete flexibility of your system layout.
6. ROTARY DISCHARGE VALVE
Designed for suspension from the ceiling using threaded rod or cable and keep piping at the set center-to-center distance.
7. DISCHARGE TRANSITION
Custom-designed to your application, discharge transitions are supplied to funnel product from discharge points to the desired flange connection or discharge spout./p>
8. DOUBLE-PIPE CEILING SUPPORT
Designed for suspension from the ceiling using threaded rod or cable and keep piping at the set center-to-center distance.
9. 180° DRIVE UNIT
Used in conjunction with the 180° turnaround unit, the drive unit pulls the chain through the drive unit by an electric gearmotor powered sprocket. The drive unit may be run in either direction for single or bi-directional system configurations. The drive unit is installed at the end of the circuit system and is typically used as the final or only discharge point.
IN-LINE
1. 180° TENSIONING TURNAROUND UNIT
Keeps the chain tensioned within the system and adjusts as the conveyor is loaded and unloaded with product. Configurable with either internal or external tension adjustment.
2. PRODUCT INLET WITH OPTIONAL FLOW BAFFLE
The entry point of product into the conveying system. Can incorporate flow control baffles to set product fill level and prevent shearing.
3. DOUBLE-PIPE FLOOR SUPPORT
Used to support the piping and maintain the set center-to-center distance. The stand includes threaded leveling mounts that allow for vertical pipe adjustment.
4. PRODUCT SIGHT GLASS
Enables viewing during conveying and is made from a clear polycarbonate with the same dimensions as the stainless steel piping.
5. SWEEP ELBOW
Used for gentle changes in pipe direction, sweep elbows are specially bent from seamless pipe to precise dimensional tolerances and uniform concentricity. Based on requirements, elbows are available in a variety of angles and radii for complete flexibility of your system layout.
6. DOUBLE-PIPE CEILING SUPPORT
Designed for suspension from the ceiling using threaded rod or cable and keep piping at the set center-to-center distance.
7. COMPRESSION COUPLING
Standard pipe connections use 4-bolt compression couplings with an internal EPDM gasket and metal grounding strip.
8. 180° DRIVE UNIT
Used in conjunction with the 180° turnaround unit, the drive unit pulls the chain through the drive unit by an electric gearmotor powered sprocket. The drive unit may be run in either direction for single or bi-directional system configurations. The drive unit is installed at the end of the circuit system and is typically used as the final or only discharge point.
9. DISCHARGE TRANSITION
Custom-designed to your application, discharge transitions are supplied to funnel product from discharge points to the desired flange connection or discharge spout.
MULTIPLE ELBOWS
1. 180° TENSIONING TURNAROUND UNIT
Keeps the chain tensioned within the system and adjusts as the conveyor is loaded and unloaded with product. Configurable with either internal or external tension adjustment.
2. PRODUCT INLET WITH OPTIONAL FLOW BAFFLE
The entry point of product into the conveying system. Can incorporate flow control baffles to set product fill level and prevent shearing.
3. PRODUCT SIGHT GLASS
Enables viewing during conveying and is made from a clear polycarbonate with the same dimensions as the stainless steel piping.
4. DOUBLE-PIPE FLOOR SUPPORT
Enables viewing during conveying and is made from a clear polycarbonate with the same dimensions as the stainless steel piping.
5. SWEEP ELBOW
Used for gentle changes in pipe direction, sweep elbows are specially bent from seamless pipe to precise dimensional tolerances and uniform concentricity. Based on requirements, elbows are available in a variety of angles and radii for complete flexibility of your system layout.
6. COMPRESSION COUPLING
Designed for suspension from the ceiling using threaded rod or cable and keep piping at the set center-to-center distance.
7. DOUBLE-PIPE CEILING SUPPORT
Standard pipe connections use 4-bolt compression couplings with an internal EPDM gasket and metal grounding strip.
8. ROTARY DISCHARGE VALVE
Incorporates a pneumatic actuated drop-door, which allows for automated opening and closing of the valve. Multiple discharge units may be placed at any location in a system when a number of discharge points are required, such as supplying product to a bank of silos.
10. DISCHARGE TRANSITION
Custom-designed to your application, discharge transitions are supplied to funnel product from discharge points to the desired flange connection or discharge spout.
TRANSFER
1. 180° TENSIONING TURNAROUND UNIT
Keeps the chain tensioned within the system and adjusts as the conveyor is loaded and unloaded with product. Configurable with either internal or external tension adjustment.
2. PRODUCT INLET WITH OPTIONAL FLOW BAFFLE
The entry point of product into the conveying system. Can incorporate flow control baffles to set product fill level and prevent shearing.
3. DOUBLE-PIPE FLOOR SUPPORT
Used to support the piping and maintain the set center-to-center distance. The stand includes threaded leveling mounts that allow for vertical pipe adjustment.
4. PRODUCT SIGHT GLASS
Enables viewing during conveying and is made from a clear polycarbonate with the same dimensions as the stainless steel piping.
5. SWEEP ELBOW
Used for gentle changes in pipe direction, sweep elbows are specially bent from seamless pipe to precise dimensional tolerances and uniform concentricity. Based on requirements, elbows are available in a variety of angles and radii for complete flexibility of your system layout.
6. DOUBLE-PIPE CEILING SUPPORT
Designed for suspension from the ceiling using threaded rod or cable and keep piping at the set center-to-center distance.
7. COMPRESSION COUPLING
Standard pipe connections use 4-bolt compression couplings with an internal EPDM gasket and metal grounding strip.
8. 180° DRIVE UNIT
Used in conjunction with the 180° turnaround unit, the drive unit pulls the chain through the drive unit by an electric gearmotor powered sprocket. The drive unit may be run in either direction for single or bi-directional system configurations. The drive unit is installed at the end of the circuit system and is typically used as the final or only discharge point.
9. DISCHARGE TRANSITION
Custom-designed to your application, discharge transitions are supplied to funnel product from discharge points to the desired flange connection or discharge spout.
INTEGRATED DRIVE & TENSION LOOP
1. 180° TENSIONING TURNAROUND UNIT
Keeps the chain tensioned within the system and adjusts as the conveyor is loaded and unloaded with product. Configurable with either internal or external tension adjustment.
2. PRODUCT INLET WITH OPTIONAL FLOW BAFFLE
The entry point of product into the conveying system. Can incorporate flow control baffles to set product fill level and prevent shearing.
3. DOUBLE-PIPE FLOOR SUPPORT
Used to support the piping and maintain the set center-to-center distance. The stand includes threaded leveling mounts that allow for vertical pipe adjustment.
4. PRODUCT SIGHT GLASS
Enables viewing during conveying and is made from a clear polycarbonate with the same dimensions as the stainless steel piping./p>
5. SWEEP ELBOW
Used for gentle changes in pipe direction, sweep elbows are specially bent from seamless pipe to precise dimensional tolerances and uniform concentricity. Based on requirements, elbows are available in a variety of angles and radii for complete flexibility of your system layout.
6. DOUBLE-PIPE CEILING SUPPORT
Designed for suspension from the ceiling using threaded rod or cable and keep piping at the set center-to-center distance.
7. COMPRESSION COUPLING
Standard pipe connections use 4-bolt compression couplings with an internal EPDM gasket and metal grounding strip.
8. 180° DRIVE UNIT
Used in conjunction with the 180° turnaround unit, the drive unit pulls the chain through the drive unit by an electric gearmotor powered sprocket. The drive unit may be run in either direction for single or bi-directional system configurations. The drive unit is installed at the end of the circuit system and is typically used as the final or only discharge point.
9. DISCHARGE TRANSITION
Custom-designed to your application, discharge transitions are supplied to funnel product from discharge points to the desired flange connection or discharge spout.
Foire aux questions
Can I get a combination of any two or more systems?
Absolument. Le but des modèles spécifiques est de mettre en évidence chaque capacité. Votre ou vos convoyeurs tubulaires seront personnalisés en fonction des exigences exactes de votre projet, avec autant d’entrées, de décharges et de balayages que vous le souhaitez.
Can I get an entire tubular drag conveyor made out of sight glass?
Théoriquement oui. En termes pratiques, vous pourriez probablement vous en sortir avec la majeure partie de votre système en verre. Il suffit de demander à votre ingénieur commercial pour plus de clarté.